NEC Univerge SV8100 Features And Specifications Manual page 236

Issue 13.0
Program
Program Name
Number
14-06-01 Trunk Group Routing – Priority
Order Number
15-07-01 Programmable Function Keys
16-02-01 Department Group Assignment
for Extensions
20-06-01 Class of Service for Extensions
20-11-17 Class of Service Options (Hold/
Transfer Service) – Department
Group Trunk-to-Trunk Transfer
(Each Telephone Group
Transfer)
24-05-01 Department Group Transfer
Target Setup
2 - 202
Description/Comments
Set the priority order number 1~4.
Assign an Automatic Forwarding
at Department Group key (58) or a
Delayed Forwarding at
Department Group key (59) for an
extension user.
Set up the Department Group
called by the pilot number and the
extension priority when a group is
called.
Call Pickup Groups are set up in
23-02.
Assign a Class of Service (1~15)
to extensions.
Turn On or Off an extension in a
Department Group ability to use
the Trunk-to-Trunk Forwarding
service codes.
Assign the Speed Dialing number
bin to be used as the destination
of the Department Group
Trunk-to-Trunk Forwarding.
UNIVERGE SV8100
Assigned Data
1
0 = Not Specify
1~100 : (Trunk Group
Number)
1001~1100 : (1000 +
Route Table Number)
Default:
Route 1, Order

Number 1 = 1 (Trunk
Group 1)
Order Numbers 2, 3, 4
= 0 (Not Specified)
All Other Routes
(2~100) and Order
Numbers (1~4) = 0
(Not Specified).
Line Key 1~48
0~99 (Normal Function
Code 751 by default)

 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
Department Groups
1~64
Priority 1~999
Default = 1

extensions in
Department Group 1
with priority in port
order:
Port 1 priority = 1
Port 256 priority = 256
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:

Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0~1999
(default = 1999) 
Call Forwarding, Off-Premise
Level
2 3
