NEC Univerge SV8100 Features And Specifications Manual page 294

Issue 13.0
System Availability
Terminals
All Terminals
Required Component(s)
SV8100 main software Version 3000 or higher
Related Features
Central Office Calls, Answering
Direct Inward Dialing (DID)
UM8000 Mail
Voice Response System (VRS)
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-10-32 Service Code Setup (for System
Administrator) – Set Private Call
Refuse
11-10-33 Service Code Setup (for System
Administrator) – Entry Caller ID
Refuse
2 - 260
Description/Comments
Enable/Disable the Private Call
Refuse (trunks) which are set in
Program 14-01-27.
Add/Delete the Caller ID to refuse.
This operation must be

performed from a Keyset.
UNIVERGE SV8100
Assigned Data
1
MLT, SLT
(default not assigned)
MLT

(default not assigned)
Caller ID – Flexible Ringing
Level
2 3
