NEC Univerge SV8100 Features And Specifications Manual page 610

Issue 13.0
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
 The items highlighted in gray are read only and cannot be changed.
Program
Program Name
Number
10-20-01 LAN Setup for External
Equipment – TCP Port
11-16-02 Single Digit Service Code Setup
– Barge-In
15-07-01 Programmable Function Keys
2 - 576
Description/Comments
Define the TCP port (0~65535)
when communicating to the SMDR
(type 5).
Set one digit Barge In code as 3.
Set up Item 02 for single digit
Barge-In. This allows you to
program a function key with an
extension number plus the
Barge-In code (i.e., 3). This allows
one-touch access to the Barge-In
feature for an extension.
Program Call Redirect key (code
49) on DTPlusWare client phones.
UNIVERGE SV8100
Assigned Data
1
0~65535
default:
External Device 1 (CTI
Server) = 0
External Device 2
(ACD MIS) = 4000
External Device 5
(SMDR Output) = 0
External Device 6 (DIM

Output) = 0
External Device 11
(O&M Server) = 8010
External Device 12
(Traffic Report Output)
= 0
External Device 13
(Room Data Output for
Hotel Service ) = 0
(default not assigned)

Line Key 1~48
0~99 (Normal Function
Code 751 by default)

 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
DTPlusWare
Level
2 3