Alarm Reports - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Enhancements
When attempting a call requiring an IP to TDM conversion and no DSP resource is available, the
system displays a message on the multiline terminal and can generate an alarm via the Alarm Report
(system software Version 3000 or higher required).
With Version 5000 or higher CPU software, the Alarm Reports feature has been enhanced to include
an alarm for IP duplication. With Version 4000 or lower CPU software, the SV8100 had no alarm
function for an IP address duplication. With this enhancement, the SV8100 is able to detect another
device on the same subnet having an IP address that conflicts with those assigned to the CPU, IPLA/
IPLB, and DSP resources to make troubleshooting easy when IP packets are not sent.
With Version 7000 or higher software, the SV8100 can be configured to send an email notification of
a system event that causes a reset and DIMLast and DIMDump files to be created. The system can
also be configured to email the DIMLast and DIMDump text files by using the SMTP email settings in
the 47-18-xx programs and mounting a PZ-ME50-US to the CCPU. This enhancement requires the
V7000 Enhancement License (0036) and Maintenance License (0043).
Description
The UNIVERGE SV8100 system logs various errors and reports information about the operation that
can be used to determine the cause of a problem. The system can indicate several errors on the
multiline telephone display, output to a USB stick on the CD-CP00-US, or be downloaded in PCPro. The
report data also can be sent via email.
Alarm Report
The Alarm Reports indicate:
System start-up/upgrade date and time

Blade communication error with date and time and the restoration date and time

Date and time a blade was removed from the system

Date and time an extension was disconnected from the system

Date and time of any system data change


Alarm Reports

Issue 13.0
Alarm Reports
2 - 31