NEC Univerge SV8100 Features And Specifications Manual page 289

UNIVERGE SV8100
9. Press Hold. The display shows:
KEY PROG ONE TOUCH
10. Press Speaker.
The telephone returns to idle.

Temporary Memory
An unanswered call causes the Call History key (Program 15-07 or SC 751: 08) to flash, indicating a new
call was placed in the temporary memory. If enabled in programming, the telephone display shows
CHECK LIST.
1. Press the Call History key (Program 15-07 or SC 751: 08), press the LIST Softkey and CID.
- OR -
Press the Left Cursor Key twice.
The last addition to the list is displayed.

2. Press the ARROW DOWN Softkey to scroll through the list of numbers in memory.
3. Press the DEL Softkey to delete the entry and scroll to the next entry.
4. The Call History key remains on as long as entries remain in memory.
5. To place a call back to a number in the temporary memory list, with the number to be dialed
displayed, press a line key or Speaker. (Refer to
2-252.)
The outgoing call is placed.

To display Caller ID for a call in Park:
 Program 15-02-08 is set to 0 (preselect) for this feature.
1. With Program 15-02-08 set to 0 (preselect) and a call in park, press the PARK key. (Program 15-07
or SC 752: 04.

With Program 15-02-08 set to 1 (One-Touch) and a call in park, press RECALL then the PARK key
(Program 15-07 or SC 752
Checking your Answered/Unanswered Caller ID Calls:
To review the last 50 outside calls your extension received:
1. At a display multiline terminal, press the LIST Softkey.
- OR -
Press the Left Cursor Key twice and skip step 2.
Caller ID
04).

Table 2-8 Keys for Entering Names on page
Issue 13.0
2 - 255