NEC Univerge SV8100 Features And Specifications Manual page 404

Issue 13.0
Program
Program Name
Number
20-11-13 Class of Service Options (Hold/
Transfer Service) – Operator
Transfer After Hold Callback
20-11-14 Class of Service Options (Hold/
Transfer Service) –
Trunk-to-Trunk Transfer
Restriction
20-11-15 Class of Service Options (Hold/
Transfer Service) – VRS
Personal Greeting (Message
Greeting)
20-11-16 Class of Service Options (Hold/
Transfer Service) – Call Redirect
20-11-17 Class of Service Options (Hold/
Transfer Service) – Department
Group Trunk-to-Trunk Transfer
(Each Telephone Group
Transfer)
20-11-18 Class of Service Options (Hold/
Transfer Service) – No Recall
20-11-19 Class of Service Options (Hold/
Transfer Service) – Hold/
Extended Park
20-11-20 Class of Service Options (Hold/
Transfer Service) – No Callback
20-11-21 Class of Service Options (Hold/
Transfer Service) – Restriction
for Tandem Trunking on Hang
Up
20-11-22 Class of Service Options (Hold/
Transfer Service) – Restricted
Unsupervised Conference
2 - 370
Description/Comments
Turn Off or On an extension ability
to have a call which recalls from
hold transfer to the operator.
Turn Off or On the Trunk-to-Trunk
Transfer Restriction. If enabled,
Trunk-to-Trunk Transfer is not
possible.
Turn Off or On an extension user
ability to dial Service Code 616 to
record, listen to or erase the
Personal Greeting Message.
Turn Off or On an extension user
ability to transfer a call to a
predefined destination (such as an
operator, voice mail, or another
extension) without answering the
call.
Turn Off or On an extension user
in a Department Group ability to
use the Trunk-to-Trunk
Forwarding service codes.
Allow (0)/Deny (1) answered
Transferred calls from recalling the
originating extension.
Determine whether an extension
Class of Service should allow
normal (0) or extended Park (1).
Turn Off or On an extension ability
to receive Callbacks.
Allow/Deny an extension user
ability to set up a tandem/
conference call automatically
when they hang up.
Allow/Deny an extension user
ability to initiate a Trunk-to-Trunk
Transfer (Tandem Trunking).
UNIVERGE SV8100
Assigned Data
1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for COS
1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Allow
1 = Deny
(default = 0 for
COS 1~15)
0 = Allow
1 = Deny
(default = 0 for
COS 1~15)
Cordless DECT Terminals
Level
2 3









