NEC Univerge SV8100 Features And Specifications Manual page 282

Issue 13.0
Program
Program Name
Number
15-03-09 Single Line Telephone Basic
Data Setup – Caller ID Function –
For External Module
15-03-10 Single Line Telephone Basic
Data Setup – Caller ID Name
15-07-01 Programmable Function Keys
20-02-08 System Options for Multiline
Telephones – LCD Display
Holding Time
20-06-01 Class of Service for Extensions
20-08-15 Class of Service Options
(Outgoing Call Service) – Block
Outgoing Caller ID
20-09-02 Class of Service Options
(Incoming Call Service) – Caller
ID Display
2 - 248
Description/Comments
Enable/Disable the Caller ID FSK
signal for an external Caller ID
module or a 3rd-Party vendor
telephone with Caller ID display.
If voice mail is used, this setting
must be disabled or the system
integration codes for disconnect
are incorrect. For Caller ID Sender
Queuing, set this option to "1".
Determine whether or not a single
line telephone should display the
Caller ID name.
Assign functions to multiline
terminal line keys.
Determine the time a user display
shows Caller ID for a second
incoming call.
Assign a Class of Service (1~15)
to extensions.
Turn Off or On a user Class of
Service from automatically
blocking outgoing Caller ID
information when a call is placed.
If block is enabled, the system
automatically inserts the Caller ID
block code 67 (defined in
Program 14-01-21) before the
user dialed digits (this requires
Program 14-02-10 to be enabled).
If block is disabled, the system
outdials the call just as it was
dialed by the user.
Turns Off or On the Caller ID
display at an extension.
UNIVERGE SV8100
Assigned Data
1
0 = Disable
1 = Enable
(default = 0)
0 = Disable
1 = Enable
(default = 1)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
0~64800 (seconds)
(default = 5 seconds)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On

(default = 0 for
COS 1~15)
Level
2 3






Caller ID