NEC Univerge SV8100 Features And Specifications Manual page 602

Issue 13.0
Program
Program Name
Number
20-13-51 Class of Service Options
(Supplementary Service) –
Number and Name Appear in the
Directory
Operation
To set up and program the D
1. Press and hold down
displayed on the LCD.
2. Press Ring/Vol repeatedly to scroll through the line key (LK) and feature options for function key
F1.
3. Press On/Off MUTE to select the displayed line key or feature.
4. When a Line key is assigned, press MUTE once to enter the Off-Hook Ringing ON or OFF Mode.
Press Ring/Vol to toggle between TALK for On or NO TALK for Off.
TALK is selected when the F1~F4 function keys are programmed for CO or Call Appearance Keys. NO TALK is

selected when F1~F4 function keys are programmed for functions not requiring an off-hook state (e.g., Log On/
Off or DND.)
5. Press On/Off MUTE to advance to the next function key (F2~F4).
6. After programming F4, press On/Off MUTE to advance to Global Off-Hook Ringing Assignment.
7. Press Ring/Vol to turn Global Off-Hook Ringing On or Off (LCD indicates ON or OFF as
appropriate).
8. Press TALK to exit.
Function keys F1~F4 can be programmed as Line Keys 1~16, Redial (LNR/SPD), Answer (ANS), Feature

(FNC), or Recall. When assigned, these keys operate the same as on an NEC multiline terminal.
When initially installed, function keys F1~F4 default to Line keys 1~4 respectively and Off-Hook Ringing

defaults to ON.
Global Off-Hook Ringing must be ON (default) for any function key to operate with off-hook ringing.

Switching Between the Desktop Multiline Telephone and the D
Using the Base Unit:
term
When the D Cordless Lite II is associated with a multiline telephone the following is applicable:
Switching between the cordless mode and desk mode must be done while both telephones are

idle.
2 - 568
Description/Comments
Determine if an extension name
and number are Listed or Unlisted
in the directory.
term
Cordless Lite II (DTH-4R-1):
and , then press TALK. The F1 LED flashes red and F1=LK01 is
#

UNIVERGE SV8100
Assigned Data
0 = Off
1 = On
(default = 1 for
COS 1~15)
term
Cordless Lite Telephone
term
D Cordless Lite II Terminal
Level
1 2 3
