NEC Univerge SV8100 Features And Specifications Manual page 312

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

Issue 13.0
During the trunk measurement process, the following LCD indications are provided:
During measurement: Measurement (x/4)
x = number of measurements
Measure complete: Complete
Error condition: Error
Trunk busy: Busy
After successful measurement, the option to copy the same settings to all analog trunks is shown.
Side Tone Auto Setup available when the system is in an idle condition.
Conditions
If the trunk name seize display is enabled in programming, the Call Timer starts
automatically after the user places a trunk call. Disabling the trunk name seize display also
disables the Call Timer.
The system can automatically select the correct line to use based on the number dialed and
the time.
With Automatic Handsfree, an extension user can press a line key to place a trunk call
without lifting the handset or pressing Speaker. Users without Automatic Handsfree can
preselect a line key before lifting the handset or pressing Speaker.
Long Conversation Cutoff can disconnect incoming and outgoing CO calls after a set time.
Using the Warning Tone for Long Conversation feature allows users on outgoing calls to
hear a warning tone prior to the call disconnecting.
An extension Toll Class of Service may prevent dialing certain numbers.
Dialing 9 or any other trunk access code after dialing an extension, terminates the intercom
call and seizes a trunk.
Phones that have an APR/APA installed do not pass voice to a trunk until the interdigit time
expires (Program 21-01-03).
Setting Program 14-02-11 to On may cause a slight delay in dial tone while loop current is
returned.
When Account Codes are enabled, the user must press the
character is passed to the telco. The system recognizes the initial
Account Code entry, the second
be passed to telco.
To adjust for proper audio quality, refer to Programs 81-07 and 81-17.
2 - 278
as the end of an Account Code entry, and the third
UNIVERGE SV8100
three times before the
as the beginning of an
Central Office Calls, Placing
will

Advertisement

Table of Contents
loading

Table of Contents