NEC Univerge SV8100 Features And Specifications Manual page 172

Issue 13.0
Program
Program Name
Number
26-13-01 ARS Class of Service for NetLink
(DT700)
44-05-01 ARS/F-Route Table – Trunk
Group Number
44-05-02 ARS/F-Route Table – Delete
Digits
44-05-03 ARS/F-Route Table – Additional
Dial Number Table
44-05-04 ARS/F-Route Table – Beep Tone
44-05-05 ARS/F-Route Table – Gain Table
Number for Internal Call
44-05-06 ARS/F-Route Table – Gain Table
Number for Tandem
Connections
44-05-07 ARS/F-Route Table – ARS Class
of Service
44-05-08 ARS/F-Route Table – Dial
Treatment
2 - 138
Description/Comments
Use to set an extension's ARS
Class of Service when used for
NetLink. Automatic Route
Selection uses ARS Class of
Service when determining how to
route an extension's calls.
Select the trunk group number to
be used for the outgoing ARS call.
For each ARS/F-Route table
(1~500) assign a priority number
(1~4). Enter the number of digits to
be deleted (0~255) from the dialed
number.
For each ARS/F-Route table
(1~500) assign a priority number
(1~4). Enter the table number
(defined in Program 44-06) for
additional digits to be dialed
(0~1000).
For each ARS/F-Route table
(1~500) assign a priority number
(1~4). Select whether or not a
beep is heard if a lower priority
trunk group is used.
For each ARS/F-Route table
(1~500) assign a priority number
(1~4). Select the gain table
number to be used for internal
calls (0~500).
For each ARS/F-Route table
(1~500) assign a priority number
(1~4). Select the gain table
number to be used for the tandem
call (defined in Program 44-07).
For each ARS/F-Route table
(1~500) assign a priority number
(1~4). Select the Class of Service
to be used for ARS (0~16).
Extension ARS COS is
determined in Program 26-04-01.
For each ARS/F-Route table
(1~500) assign a priority number
(1~4). Select the Dial Treatment to
be used (0~15). The Dial
Treatments are defined in
Program 26-03-01.
UNIVERGE SV8100
Assigned Data
1
Day/Night Mode: 1~8
Class = 0~16

(default = 0)
0~100, 255
0 = No Setting

255 = Extension Call
(default = 0)
0~255
(255 = Delete All)

(default = 0)
0~1000
(default = 0)

0 = Off (No Beep)
1 = On (Beep)s

(default = 0)
0~500
0 = No Setting

(default = 0)
0~500
0 = No Setting

(default = 0)
0~16
(default = 0)

0~15
(default = 0)

Automatic Route Selection
Level
2 3