NEC Univerge SV8100 Features And Specifications Manual page 380

Issue 13.0
Single Line Telephone
1. Establish Intercom or trunk call.
2. Hookflash and dial
3. Dial extension you want to add.
- OR -
Access trunk call.
- OR -
Retrieve call from Park orbit.
4. Hookflash and repeat step 3 to add more parties.
- OR -
Hookflash twice to set up the Conference.
To Split (alternate) between the parties in Conference:
Multiline Terminal
1. Press Conf (Transfer) or Conference key (Program 15-07 or SC 751: 07).
2. Dial Split service code (794).
Repeat this procedure to alternate between the remaining parties in the Conference. Press the Conf softkey or

press Conf twice to set up the Conference again.
Single Line Telephone
1. Hookflash and dial 794.
Repeat this procedure to alternate between the remaining parties in the Conference. Hookflash twice to set up the

Conference again.
To drop an outside call from the Conference:
1. Press Hold to place the conference call on hold.
2. Hang up.
The lines involved in the Conference ring back separately to the telephone.

3. Answer and disconnect the unwanted outside call.
4. To re-establish the Conference, answer the remaining call by pressing Conf after each call is
answered. Press Conf twice when all calls have been answered.
2 - 346
1.
#
UNIVERGE SV8100
Conference