NEC Univerge SV8100 Features And Specifications Manual page 379

UNIVERGE SV8100
Program
Program Name
Number
20-13-16 Class of Service Options
(Supplementary Service) –
Barge-In, Receive
20-14-11 Class of Service Options for
DISA/E&M – DISA/Tie Trunk
Barge-In
Operation
To establish a Conference:
Multiline Terminal
1. Establish intercom or trunk call.
2. Press Conf or Conf softkey (Program 15-07 or SC 751: 07).
3. Dial the extension you want to add.
- OR -
Access outside call.
- OR -
Retrieve call from Park orbit.
To get the outside call, you can either press a line key or press the Speaker key and dial 9, the Trunk Access Code

+ the trunk number (default #9). You can optionally go back to step 2 to add more parties to your Conference.
4. When called party answers, press the Add softkey or Conf twice.
If you cannot add additional parties to your Conference, you have exceeded the system Conference limit.

If the call being added is busy/unanswered:

With an outside call, press the line or Call Appearance (CAP) key for a call previously added to the Conference.
The unanswered call drops and the initiator is back into the Conference call.
Adding an Intercom call to an outside Conference call: Press the Conf softkey on the multiline terminal display

or Conf twice to re-establish the Conference. If using a non-display telephone, press Conf twice.
With only Intercom calls in the Conference: Press Conf twice to re-establish the Conference. If the voice mail

answers, there is no way to drop that extension out. You must drop the Conference call.
5. Repeat steps 2~4 to add more parties.
Conference
Description/Comments
Turn Off or On Barge-In at the
receiving extension (i.e., Barge-In
receive).
Enable (1)/Disable (0) a DISA or
tie trunk user from using the
Barge-In feature.
Assigned Data
1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
Issue 13.0
Level
2 3


2 - 345