Table 2-20 Dtplusware Oai/Tapi License Feature Matrix - NEC Univerge SV8100 Features And Specifications Manual

Issue 13.0
Refer to

Table 2-20 DTPlusWare OAI/TAPI License Feature Matrix


functionality depending on whether the SV8100 is licensed for the minimum OAI or includes the
optional TAPI license.
Feature
Basic Functionality
Basic Presence (Vacation, Sick, etc.)
Enhanced Presence (On Call, Phone
Busy State, etc.)
iPhone Support
Call Event Monitoring
Call Control
Support for Mobile Extension Monitoring
Events
Incoming Call Popup When Both-Ring
Enabled
Licensing
Desktop Suite
UCB
(Unified Communications for Business)
Conditions
After a DTPlusWare sets Call Forward Both Ring from their desk phone technicians will not

be able to log into Web Pro, PC Pro or Telephone programming for two minutes. This is
because DTPlusWare logs into system programming to set this forwarding.
Main SV8100 software Version 5.00 or higher is required to support DTPlusWare v2.0.

If using the Presence feature before installing the CSTA Server you must install the

appropriate 4.0.0 or higher TAPI driver for the PC the CSTA server will be installed on.
Refer to the NTAC Download site for a list of available drivers and installation instructions.
Before installing the CSTA Server you must install the appropriate NEC SV8100 Connector

software on the PC the CSTA server will be installed on.
All IP Terminals used for DTPlusWare must have firmware Version 4.x.x.x or higher

installed.
Predefined instant messages can only be sent from DT750/Sophisticated telephones.

2 - 572
Table 2-20 DTPlusWare OAI/TAPI License Feature Matrix
DTPlusWare with SOAI
License (0123)
Not Available
Need SOAI License Only
DTPlusWare with SOAI (0123) and
Available
Yes
Yes
Yes
By SOAI
By SOAI
No
Need SOAI and 3rd Party CTI License
Available
Available
UNIVERGE SV8100
for a listing of supported
3rd Party TAPI (0112)
Available
Yes
Yes
Yes
By TAPI
By SOAI
Yes, via TAPI
Available
Not Available
Not Available
DTPlusWare