NEC Univerge SV8100 Features And Specifications Manual page 376

Hide thumbs Also See for Univerge SV8100:

Table of Contents

An option is available which allows an extension Conf key (SC 751: 07) to be programmed

for Conference or for Transfer. When set for Transfer, the user places a call on hold, dials

the extension to which it should be transferred, and presses Conf. The call is then

transferred. When set for Conference, with an active call, the user presses Conf, places a

second call, then presses Conf twice. All the calls are then connected.

Users can Barge-In on a Conference call if allowed in programming.

Define the outgoing call options for each trunk and user.

Set up a Conference with a co-worker in your immediate work area.

DISA and Tie Line users may use the Barge-In feature on a Conference call if they know

the service code and are permitted in their DISA/Tie Line Class of Service.

Meet Me Conference lets an extension user set up a Conference via Paging.

Meet Me Paging lets an extension user set up a two-party meeting via Paging.

A user can set up an Unsupervised Trunk-to-Trunk Conference and then drop out of the

call, allowing the remaining parties to continue the conversation. Establish two trunk calls,

press Hold and dial

You can optionally program Conf (Transfer) for Transfer. In this case, the multiline terminal

must have a Conference function key. The system also allows a call to be transferred into a

Conference call.

When the Conference Originator hangs up with a conference on Hold, or when trying to add

another caller, all internal calls are dropped.

Conferencing when talking on a Virtual Extension:

While talking on a Virtual Extension, if the station has an internal call on Hold, a conference

call cannot be established.

While talking on a Virtual Extension, if the station receives an intercom call (call to its actual

station number), a conference call cannot be established.

While talking on a Virtual Extension, if the station has a call on Hold, a conference call cannot

be established.

Default Setting

System Availability

All Terminals

UNIVERGE SV8100