NEC Univerge SV8100 Features And Specifications Manual page 586

Hide thumbs Also See for Univerge SV8100:

Table of Contents

Synchronous Ringing does not apply to the cordless terminals.

A beep indicates when the cordless terminal receives off-hook ringing.

A spare battery is available as an Optional Available Part. A second battery is not shipped

with the product.

The battery can be charged only when it is installed in the handset and the handset is in the

charger. A stand-alone battery charger is not available.

Environments with many metal parts, metal shelves, or metal buildings are known to reduce

telephone performance.

When multiple cordless telephones are used in your office, they must operate on different

channels and be at least 20 feet apart (including the base unit and the telephones).

cordless and DECT telephones do not ring when receiving a doorbox call. Notification

is shown in the display.

cordless and Cordless DECT telephones can activate the door strike relay using a

Recall key assigned in the phone configuration or, by a Flash Key assigned to one of the

line keys in Program 15-07 (751: 62) (Version 4000 or higher software is required).

Under certain conditions, HOLD and TRANSFER have the same behavior. To prevent an

unwanted transfer after placing a call on hold and calling another user, the Line Key for the

call on hold must be pressed to retrieve the call from hold, otherwise the call is transferred

when the Cordless Terminal is placed in idle.

Cordless telephones do not support the Caller ID List feature.

The DTL-8R-1 DECT Cordless – only supports connection with DT300 terminals.

DTH-4R-1/2 Cordless – only supports connection with Series i terminals (DTH/DTR).

DTR-4R-1/2 Cordless – only supports connection with Series i terminals (DTH/DTR).

Default Setting

System Availability

DTH-4R-1 TEL

UNIVERGE SV8100

Cordless Lite II Terminal