NEC Univerge SV8100 Features And Specifications Manual page 381

UNIVERGE SV8100
To exit a Conference with internal and outside conference members without affecting the other
parties:
Multiline Terminal
1. Hang up.
If you press Hold while on a call with two outside callers, the outside callers hear what is programmed in

Program 10-04-01.
Single Line Telephone
1. Hang up.
If you are not permitted to use Tandem Trunking, outside callers may hear Music on Hold.

To exit a Conference when all conference members are outside parties without affecting the
other parties:
Multiline Terminal
1. Press Hold key.
2. Dial 8.
#
3. Hang up.
Single Line Telephone
1. Hookflash and dial # 8.
2. Hang up.
To Barge-In to Conference Call:
1. Pick up the handset or press Speaker and dial the service code (default = 710).
If the telephone does not have the proper COS, a warning tone is sent. After the user hangs up, the system

automatically places a Callback to the extension.
2. Dial the extension number or press a DSS key of a telephone within a Conference call.
When a new call is added to the conference, an intrusion tone is heard by all parties in the Conference,

depending on system programming, and all display multiline terminals show the joined party. If a Conference is
not possible:
the extension user hears a warning tone

the DISA user is rerouted to the defined ring group

- OR -
the Tie Line user hears a busy tone.

Conference
Issue 13.0
2 - 347