Important Notes; Table 2-1 Feature Comparison List - NEC Univerge SV8100 Features And Specifications Manual

Issue 13.0
I
S 2
MPORTANT
ECTION
Simplifying Multiline Terminal Operation with One-Touch Keys
A multiline terminal user can access many features using Service Codes (e.g.,
Service Code 744 sets Call Forward Busy/No Answer). To streamline the operation of
their telephone, a multiline terminal user can store these codes under One-Touch
Keys. This provides one-button operation for almost any feature. To find out more,
turn to the One-Touch Calling and One-Touch Serial Operation features.
Programmable Keys
When reading an instruction using programmable keys, you will see a notation similar
to (PRG 15-07 or SC nnn). This means that the key requires service code nnn, and
you can program this code in Program 15-07 or by dialing Service Code 751 or 752.
Refer to the Programmable Function Keys feature for more information.
Using Handsfree
The manual assumes each extension has Automatic Handsfree. This lets a user just
press a line key or Speaker key to answer or place a call. For extensions without
Automatic Handsfree, the user must:


Port Assignments
Port Calculation for Trunks:
The system detects the type of blade (trunk or extension) and assigns the required
extension or trunk ports to the slot. The system will use the next available port
numbers – it will not reserve any ports.
IPK II
S 3
ECTION

Table 2-1 Feature Comparison List

Elite IPK II and the UNIVERGE SV8100 features.
IPK II Feature Name
Account Code – Forced/Verified/Unverified
Account Code Entry
Alarm
2 - 2
N
OTES
Lift the handset or press Speaker for Intercom dial tone.
Lift the handset or press Speaker, then press a line key for trunk dial tone.
UNIVERGE SV8100 F
TO
Table 2-1 Feature Comparison List
C
EATURE
provides a cross-reference between the Electra
UNIVERGE SV8100 Feature Name
Account Code – Forced/Verified/Unverified
Account Code Entry
Alarm
UNIVERGE SV8100
L
OMPARISON IST
Features