NEC Univerge SV8100 Features And Specifications Manual page 233

UNIVERGE SV8100
Program
Program Name
Number
25-07-07 System Timers for VRS/DISA –
Long Conversation Warning
Tone Time
25-07-08 System Timers for VRS/DISA –
Long Conversation Disconnect
Time
Trunk-to-Trunk Forwarding – Normal (0) Trunks:
Program
Program Name
Number
11-10-06 Service Code Setup (for System
Administrator) – Setting the
Automatic Transfer for each
Trunk Line
11-10-07 Service Code Setup (for System
Administrator) – Canceling the
Automatic Transfer for each
Trunk Line
11-10-08 Service Code Setup (for System
Administrator) – Setting the
Destination for Automatic Trunk
Transfer
13-01-01 Speed Dialing Option Setup –
Speed Dialing Auto Outgoing
Call Mode
13-04-01 Speed Dialing Number and Name
– Speed Dialing Data
Call Forwarding, Off-Premise
Description/Comments
Determine the time a DISA caller
or any Trunk-to-Trunk (such as
Tandem Trunking) conversation
can talk before the Long
Conversation tone is heard.
Determine how long the system
waits before disconnecting a DISA
or any trunk-to-trunk (such as
Tandem Trunking) call after the
Long Conversation tone is heard.
Description/Comments
Customize the service code to be
used to set the Automatic Trunk
Forwarding feature.
Customize the service code to be
used to cancel the Automatic
Trunk Forwarding feature.
Customize the service code to be
used to set the destination for the
Automatic Trunk Forwarding
feature.
Determine if dialing an Speed
Dialing number will dial an outside
number (seizing a trunk as
assigned in Program 13-05) or an
Intercom number (0 = Trunk
Dialing Mode, 1 = Extension
Dialing Mode).
Enter the Common and Group
Speed Dialing numbers and
names which are to be used for
Trunk-to-Trunk Forwarding.
Assigned Data
1
0~64800 (seconds)
(default = 3600)
0~64800 (seconds)
(default = 10)
Assigned Data
1
MLT
(default = 733)
MLT
(default = 734)
MLT
(default = 735)
0 = Trunk Outgoing
Mode
1 = Intercom Outgoing

Mode
(default = 0)
#
1~9, 0, ,
Pause (Press line key
1)
Recall/Flash (Press
line key 2)

@ = Code to wait for
answer supervision in
ISDN (Press line key 3)
(maximum 24 digits)
(default not assigned)
Issue 13.0
Level
2 3


Level
2 3



2 - 199