NEC Univerge SV8100 Features And Specifications Manual page 307

UNIVERGE SV8100
Program
Program Name
Number
20-10-07 Class of Service Options
(Answer Service) – Automatic
Off-Hook Answer
20-13-13 Class of Service Options
(Supplementary Service) –
Continued Dialing (DTMF) Signal
on ICM Call
20-13-23 Class of Service Options
(Supplementary Service) –
Display the Reason for Transfer
21-01-15 System Options for Outgoing
Calls – Outgoing Disable on
Incoming Line (Toll Restriction)
21-01-16 System Options for Outgoing
Calls – Supervise Dial Detection
Timer
21-01-17 System Options for Outgoing
Calls – Restriction Digit in
Outgoing Disable on Incoming
Line
22-01-01 System Options for Incoming
Calls – Incoming Call Priority
22-01-02 System Options for Incoming
Calls – Incoming Call Ring No
Answer Alarm
22-01-03 System Options for Incoming
Calls – Ring No Answer Alarm
Time
22-01-04 System Options for Incoming
Calls – DIL No Answer Recall
Time
Central Office Calls, Answering
Description/Comments
Turn Off or On an extension user
ability to use Universal Auto
Answer (no service code
required).
Turn Off or On an extension user
ability to use Continued Dialing,
which allows DTMF signal sending
while talking on extension.
Select whether or not an extension
should display the reason a call is
being transferred to their
extension (Call Forward Busy, Call
Forward No Answer, DND).
Enable/Disable the Outgoing
Disable on Incoming Line feature.
With the Outgoing Disable on
Incoming Line feature, if dial tone
is not detected after the extension
answers an incoming line, the
system determines the call is
unable to complete and releases
the DTMF receiver.
With the Outgoing Disable on
Incoming Line feature, determine
the number of digits (0~9) to be
dialed before the call should be
disconnected.
Determine if Intercom calls or
trunk calls have answer priority
when both are ringing
simultaneously.
Enable/Disable the Incoming Call
RNA Alarm. If enabled, the ring
cadence changes for a call that
rings longer than the interval set in
Program 22-01-03.
Set the Ring No Answer Alarm
time. If a trunk rings a multiline
terminal longer than this time, the
system changes the ring cadence.
A DIL that rings its programmed
destination longer than this
interval diverts to the DIL No
Answer Ring Group (set in
Program 22-08).
Assigned Data
1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Disable
1 = Enable
(default = 0)
0~64800 (seconds)
(default = 20)
Digits 0~9
(default = 4)
0 = Intercom call
priority
1 = Trunk call priority
(default = 1)
0 = Disable
1 = Enable
(default = 0)
0~64800 (seconds)
(default = 60)
0~64800 (seconds)
(default = 0)
Issue 13.0
Level
2 3










2 - 273