NEC Univerge SV8100 Features And Specifications Manual page 237

UNIVERGE SV8100
Trunk-to-Trunk Forwarding – DID (3) Trunk Forwarding Using DID Translation Table:
 Refer to Direct Inward Dialing (DID) for additional DID programming.
Program
Program Name
Number
22-11-05 DID Translation Table Number
Conversion – Transfer
Destination Number 1
22-11-06 DID Translation Table Number
Conversion – Transfer
Destination Number 2
Operation
To activate Call Forwarding Off-Premise non-split:
1. At a multiline terminal, press Speaker.
- OR -
At a single line telephone, lift the handset.
2. Dial the Call Forwarding Service Code.
- OR -
At a multiline terminal only, press the Call Forwarding Programmable Function keys (Program
15-07-01, Program 15-07-10~Program 15-07-15 or SC 751 Key Code 10~15).
3. Dial 1 (Set).
4. Dial the Trunk Access Code (default: 9) + Number (9+2142622000).
Trunk access codes are 9 (ARS/Trunk Group Routing), 704 + Line Group (1~9, 01~99 or 001~100) or #9 + Line

number (e.g., 05 or 005 for line 5).
Your DND or Call Forwarding (Device) Programmable Function key flashes.

Call Forwarding, Off-Premise
Description/Comments
For each DID Translation Table
entry (1-2000), specify the first
and second Transfer Destinations
if the callers receives a busy or no
answer (action defined in Program
22-11-04).
If the Transfer Destinations

are busy or receive no
answer, those calls are
transferred to the final
transfer destination (Program
22-10).
Assigned Data
1
0 = No Setting

1~100 = Incoming
Group
101 = (Not Used)
102 = In-Skin/External
Voice Mail or InMail
201~264 = Extension
Group
400 = Valid Extension

Number
401 = DISA
501~548 = DISA/VRS
Message
1000~999 = Speed
Number (000~999)
(default = 0)
Issue 13.0
Level
2 3
2 - 203