Printing Reports - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Program
Program Name
Number
90-24-02 System Alarm Report
Notification Time Setup – Day
90-24-03 System Alarm Report
Notification Time Setup – Hour
90-24-04 System Alarm Report
Notification Time Setup – Minute

Printing Reports:

Program
Program Name
Number
90-12-01 System Alarm Output – Output
Port Type
Printing System Information Reports:
Program
Program Name
Number
90-13-01 System Information Output –
Output Port Type
90-13-02 System Information Output –
CTA Output Destination
Extension Number
Alarm Reports
Description/Comments
Set the day for the alarm report to
print.
Set the hour for the alarm report to
print.
Set the minute for the alarm report
to print.
Description/Comments
Indicate the type of connection
used for the System Alarms. The
baud rate for the COM port should
be set in Program 10-21-02.
Description/Comments
Indicate the type of connection
system information.
If the output port type (Program
90-13-01) is set to CTA, enter the
extension number with the CTA
connection.
Assigned Data
1
Day 00~31
(0 = Disabled)
(default = 00)
Day 00~23
(0 = Disabled)
(default = 00)
Day 00~59
(0 = Disabled)
(default = 00)
Assigned Data
1
0 = No Setting
1~3 = Reserved
4 = CTA/CTU
5 = USB Memory
(default = 0)
Assigned Data
1
0 = No Setting
4 = CTA/CTU
5 = USB
(default = 0)
Extension Number (up
to eight digits)
(default not assigned)
Issue 13.0
Level
2 3



Level
2 3

Level
2 3


2 - 39