NEC Univerge SV8100 Features And Specifications Manual page 1470

Issue 8.01
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-12-03 Service Code Setup (for Service
Access) – Override (Off-Hook
Signaling)
11-16-04 Single Digit Service Code Setup
– Intercom Off-Hook Signaling
15-02-12 Multiline Telephone Basic Data
Setup – Off-Hook Ringing
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions
2 - 1442
Description/Comments
Assign the service code used for
off-hook Signaling Override.
Assign the one-digit service code
used for off-hook Signaling.
Set the telephone off-hook
signaling that occurs when a
telephone user receives a second
call while busy on a handset call.
To enable or disable off-hook
signaling for an extension Class of
Service, use Program 20-13-06.
Assign a function key for off-hook
Signaling (code 33).
Assign a Class of Service (1~15)
to an extension.
UNIVERGE SV8100
Assigned Data
1
MLT, SLT
(default = 709)
(default = )
0 = Muted Off-Hook
Ringing
1 = No Off-Hook
Ringing
2 = Not Used
3 = Beep in Speaker

(SP)
4 = Beep in Handset
(HS)
5 = Speaker & Handset
Beep
(default = 5)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:

Extension port 101 =
Class 15
All other extension port
= Class 1
Tone Override
Level
2 3


