Env Sensor Error - Xerox Phaser 3010 Service Manual

ENV Sensor Error

Phaser 3010/3040/WorkCentre 3045 Service
An error occurred while reading the Humidity Sensor.
Applicable Error
• 092-661: Env Sensor Error
Initial Actions
• Cycle printer power.
• If the problem persists, use the following procedure
Troubleshooting Reference Table
Applicable Parts
MCU Board, PL7.1.3
■
Troubleshooting Procedure Table
Step Actions and Questions
1 Replace the MCU Board (page 4-43).
Does the error persist?
Xerox Internal Use Only
Error Troubleshooting
Wiring and Plug/Jack Map References
■
Yes
Contact your
designated
field support for
assistance.
No
Complete.
2-107