Workcentre 3045 Error Codes - Xerox Phaser 3010 Service Manual

WorkCentre 3045 Error Codes

Phaser 3010/3040/WorkCentre 3045 Service
The WorkCentre 3045 Error Message Summary table lists possible errors, along
with the corresponding code, and page reference for the corrective procedure.
• The Code column lists the code associated with the error.
• The Error Message LCD column shows the message as it appears on the LCD
when the error occurs during normal operation.
• The Error Description column describes the error.
• The Go to column links to the troubleshooting procedure related to the error.
Use this table to identify the proper procedure to correct the reported error.
WorkCentre 3045 Error Message Summary
Code Error Message LCD
005-121 Paper Jam
005-121
Open ADF Cover and
Clear Jam
005-301 Cover Open
005-301
Remove paper then
Close ADF Cover
010-397 010-397
Code:xxxxxxxx
Restart Printer
016-315 016-315 System
Restart Printer
016-317 016-317
Restart Printer
Contact Support
IfMessageReturns
016-372 016-372 System
Restart Printer
Contact Support
If Message Returns
016-501 Write Flash Error
016-501 System
Contact Support
If Message Returns
016-502 Write Flash Error
016-502 System
Contact Support
If Message Returns
016-503 SMTP Error
016-504 016-50X Scan
016-506 Job Failure
016-507
Xerox Internal Use Only
Error Troubleshooting
Error Description
ADF Jam
ADF Cover Open
Fuser Error
IP ROM Check (Main) Fail
IP ROM Check (Main) Fail
Fax Memory Allocation Error
Write Flash Error
Verify Flash Error
E-mail Error
Go to
2-54
2-55
2-56
2-57
2-57
2-58
2-59
2-59
2-60
2-15