Workcentre 3045 Fax/Scanner Diagnostic Test Procedures - Xerox Phaser 3010 Service Manual

WorkCentre 3045 Fax/Scanner Diagnostic Test Procedures

Phaser 3010/3040/WorkCentre 3045 Service
Procedures for testing each IIT component using Service Diagnostics.
Carriage
Assembly
Scanner Home
Position Sensor
Carriage Motor
Interlock Switch
Power Switch Assembly
Enter FAX Scanner Diagnostic
1. Turn the printer Off.
2. Press and hold the Up and Down Arrow simultaneously and turn the printer
On.
3. Release the buttons when CE Mode Please wait appears on the display.
4. Press OK at Fax/Scanner.
Information
Select this menu item to display the value of the scan counter.
Xerox Internal Use Only
LVPS HVPS
MCU Board
Error Troubleshooting
Scanner Board
Control Panel
Assembly
WiFi Bracket Assembly
Front USB Board
IP Board
Fax Board
s3040-175
2-49