Table of Contents
Advertisement
All manuals and user guides at all-guides.com
LCD Error Messages
Display
DOCUMENT JAM
The document has
jammed in the automatic
document feeder.
DOOR OPEN
The front cover is not
securely latched.
FUSER ERROR
There is a problem with
the fuser unit.
JAM/NO
Print media has jammed
CARTRIDGE
inside the unit, or the
laser printer
cartridge is not installed.
LINE ERROR
Your unit cannot connect
with the remote
machine, or has lost
contact because of a
problem on the phone
line.
LOAD DOCUMENT
You have attempted to
set up a sending
operation with no
document loaded.
LSU ERROR
A problem has occurred
in the LSU (Laser
Scanning Unit).
Meaning
Refer to "Clearing Jams" in
the beginning of this chapter
for instructions on how to
remove any paper.
Press down on the front cover
until it clicks in place.
Unplug the power cord, wait
until it cools and plug it back
in. If the problem still
persists, please call Xerox
service.
Refer to "Paper Jams While
Machine is Printing" to clear
the jam or install the laser
printer cartridge.
Try again. If failure persists,
wait an hour or so for the line
to clear, then try again.
Or, turn the ECM mode on.
See "Setting User-Selectable
System Features" on page
3.5.
Load a document and try
again.
Unplug the power cord and
plug it back in. If the problem
still persists, please call for
service.
Solution
6.7
Troubleshooting
Advertisement
Table of Contents
