Random Spots - Xerox Phaser 3010 Service Manual

Random Spots

Phaser 3010/3040/WorkCentre 3045 Service
There are spots of toner randomly scattered across the page.
Warning
Allow the Fuser to cool before servicing the printer.
Initial Actions
• Ensure there is no debris on the media path.
• Print several blank pages to clean the media path.
Troubleshooting Reference Table
Applicable Parts
Transfer Roller, PL1.1.11
■
Fuser, PL5.1.1
■
Troubleshooting Procedure Table
Step Actions and Questions
1
Check humidity.
The humidity is within specification.
2 Print several blank pages to clean
media path components.
The spots continue to appear.
3 Examine prints for repeating
patterns indicating a contaminated
component.
The spot pattern repeats.
4 Replace the Transfer Roller
(page 4-10).
The spots continue to appear.
Xerox Internal Use Only
Example Print
Yes No
Go to Step 2. Advise
customer.
Go to Step 3. Complete.
Go to Go to Step 4.
page 3-15.
Replace the Complete.
Fuser
(page 4-38).
Image Quality
Random Spots
3-13