Service Parts Disassembly
Feed Gear and Spring
PL2.2.19
4-76
Caution
The gears of the Main Drive Assembly are not captive to the cover. Use care
when removing the cover to maintain the correct gear orientation.
1. Remove the Main Tray (page 4-58).
2. Remove the Front Cover (page 4-60).
3. Remove the Inner Front Cover (page 4-62).
4. Remove the Left Cover (page 4-64).
5. Remove the Right Cover (page 4-57).
6. Remove the Scanner (page 4-109).
7. Disconnect P/J7601 from the Front USB Board.
8. Disconnect P/J6501 from the WiFi Adaptor.
9. Remove the Top Cover (page 4-52).
10. Remove the Rear Cover (page 4-56).
11. Remove the IP Board (page 4-103).
12. Remove the Fax Board if present (page 4-105).
13. Remove the IP Board Bracket (page 4-106).
14. Remove the Main Drive Assembly (page 4-40).
15. Release the spring from the hook on the chassis.
16. Release the hook that secures the Feed Gear to the shaft.
Xerox Internal Use Only
Phaser 3010/3040/WorkCentre 3045 Service
s3040-054