Ip Rom Check Error - Xerox Phaser 3010 Service Manual

IP ROM Check Error

Phaser 3010/3040/WorkCentre 3045 Service
Checksum error occurred in the main program ROM.
Applicable Error
• 016-315 IP ROM Check Error'
• 016-317 IP ROM Check Error
Initial Actions
• Cycle printer power.
• If the problem persists, use the following procedure.
Troubleshooting Reference Table
Applicable Parts
IP Board, PL7.2.8 (3010/3040)
■
IP Board, PL7.3.3 (3045)
■
MCU Board, PL7.1.3
■
Troubleshooting Procedure Table
Step Actions and Questions
1
Reseat all connectors on the IP and
MCU Boards.
Does the error persist?
2 Replace the IP Board (page 4-45).
Does the error persist?
Xerox Internal Use Only
Error Troubleshooting
Wiring and Plug/Jack Map References
"Map 3 - IP Board" on page 7-8
■
"IP Board" on page 7-19
■
Yes
Go to Step 2.
Replace the
MCU Board
(page 4-43).
No
Complete.
Complete.
2-57