Bottom Plate - Xerox Phaser 3010 Service Manual

Bottom Plate

PL2.2.8
Phaser 3010/3040/WorkCentre 3045 Service
1. Remove the Main Tray (page 4-58).
2. Remove the Front Cover (page 4-60).
3. Remove the Inner Front Cover (page 4-62).
4. Remove the Left Cover (page 4-64).
5. Remove the Right Cover (page 4-57).
6. Remove the Scanner (page 4-109).
7. Disconnect P/J7601 from the Front USB Board.
8. Disconnect P/J6501 from the WiFi Adaptor.
9. Remove the Top Cover (page 4-7).
10. Remove the Rear Cover (page 4-11).
11. Remove the Toner Motor (page 4-37).
12. Remove the Toner Dispense Assembly (page 4-36).
13. Remove the Fuser (page 4-38).
14. Remove the Main Drive Assembly (page 4-40).
15. Remove the Main Drive Motor (page 4-41).
16. Remove the Power Switch Assembly (page 4-46).
17. Remove the MCU Board (page 4-43).
18. Remove the IP Board (page 4-45).
19. Remove the LVPS (page 4-48).
20. Remove the IP Board bracket (page 4-106).
21. Remove the LVPS bracket (page 4-107).
22. Remove the Rear Door Interlock Switch (page 4-44).
23. Remove the xerographics assembly (page 4-33).
24. Remove the Feed Gear and Spring (page 4-25).
25. Remove the Feed Roller (page 4-17).
Xerox Internal Use Only
Service Parts Disassembly
4-71