Iot Ctd (Adc) Sensor Error - Xerox Phaser 6500 Service Manual

IOT CTD (ADC) Sensor Error

Phaser 6500/WorkCentre 6505 Service Manual
Applicable Error Code
• 092-310
Troubleshooting Reference Table
Applicable Parts
Imaging Unit (PL4.1.21)
■
Dispenser Assy (PL5.1.1)
■
Motor Frame Assy (PL5.1.2)
■
Dispenser Motor Assy (PL5.1.3)
■
Toner Cartridge (Y) (PL5.1.24)
■
Toner Cartridge (M) (PL5.1.23)
■
Toner Cartridge (C) (PL5.1.22)
■
Toner Cartridge (K) (PL5.1.21)
■
Toner Motor Harness Assy
■
(PL5.1.25)
Transfer Belt (PL6.1.7)
■
MCU Board (SFP PL8.2.13; MFP
■
PL8.3.6)
Troubleshooting Procedure
Step Actions and Questions
1 Is the shipping protection sheet still on
the Imaging Unit?
2 Open the Front Cover and check the
ADC Sensor Window.
Is the ADC Sensor window dirty?
ADC Sensor window
Xerox Internal Use Only
Error Messages and Codes
Wiring and Plug/Jack Map References
"Map 4 - SFP MCU Board" on
■
page 10-9
"Map 9 - MFP MCU Board and HVPS"
■
on page 10-18
"SFP Xerographics" on page 10-30
■
"SFP Toner Dispenser" on page 10-32
■
"MFP Xerographics" on page 10-43
■
"MFP Toner Dispenser" on page 10-45
■
Yes
Remove the
protection
sheet.
Go to step 3.
s6500-500
No
Go to step 2.
Go to step 4.
3-145