Ip Board Bracket - Xerox Phaser 3010 Service Manual

Service Parts Disassembly

IP Board Bracket

PL7.3.5
4-106
1. Remove the Main Tray (page 4-58).
2. Remove the Front Cover (page 4-60).
3. Remove the Inner Front Cover (page 4-62).
4. Remove the Left Cover (page 4-64).
5. Remove the Right Cover (page 4-57).
6. Remove the Scanner (page 4-109).
7. Disconnect P/J7601 from the Front USB Board.
8. Disconnect P/J6501 from the WiFi Adaptor.
9. Remove the Top Cover (page 4-52).
10. Remove the Rear Cover (page 4-56).
11. Remove the IP Board (page 4-103).
12. Remove the Fax Board if present (page 4-105).
13. Release hooks that secure the 2 harness guides and feed the harnesses and
guides through the holes in the bracket.
14. Remove 1 screw (silver, tap, 8mm) and 4 screws (silver metal, 6mm) that
secure the bracket.
Xerox Internal Use Only Phaser 3010/3040/WorkCentre 3045 Service
s3040-093