Image Processor Board - Xerox Phaser 3010 Service Manual

Image Processor Board

PL7.2.8
Phaser 3010/3040/WorkCentre 3045 Service
1. Remove the Main Tray (page 4-13).
2. Remove the Front Cover (page 4-15).
3. Remove the Right Cover (page 4-12)
4. Remove the Top Cover (page 4-7).
5. Disconnect all connections on the IP Board.
6. Remove 4 screws (silver, metal, 6 mm) that secure the IP Board.
SJ9
SJ8
P/J250
P/J1
Replacement Note
After replacing the IP Board, restore these customer settings:
• Control Panel language
• Default paper size
• Time zone, clock and date formats
• Preferred unit (mm or inch)
Xerox Internal Use Only
Service Parts Disassembly
s3040-048
4-45