Workcentre 3045 Covers; Holder Assemblies - Xerox Phaser 3010 Service Manual

WorkCentre 3045 Covers

Holder Assemblies

PL1.1.1, 1.1.2
Phaser 3010/3040/WorkCentre 3045 Service
1. Remove the Main Tray (page 4-58).
2. Remove the Front Cover (page 4-60).
3. Raise the Scanner Assy.
4. Remove the Inner Front Cover (page 4-62).
5. Remove 2 screws (silver, tap, 8mm) that secure the Holder Assemblies, then
slide the Holder Assemblies forward to release the hooks and carefully lift the
Scanner to remove the assemblies.
Xerox Internal Use Only
Service Parts Disassembly
s3040-058
4-51