Mcu Board - Xerox Phaser 3010 Service Manual

MCU Board

PL7.1.3
Phaser 3010/3040/WorkCentre 3045 Service
1. Remove the Main Tray (page 4-58).
2. Remove the Front Cover (page 4-60).
3. Remove the Inner Front Cover (page 4-62).
4. Remove the Left Cover (page 4-64).
5. Remove the Right Cover (page 4-57).
6. Remove the Scanner (page 4-109).
7. Disconnect P/J7601 from the Front USB Board.
8. Disconnect P/J6501 from the WiFi Adaptor.
9. Remove the Top Cover (page 4-52).
10. Disconnect all connections on the MCU Board.
11. Remove 4 screws (silver, metal, 6 mm) that secure the MCU Board.
Xerox Internal Use Only
Service Parts Disassembly
P/J14
P/J15
P/J16
P/J17
P/J10
P/J13
P/J23
P/J25
P/J18
P/J20
P/J21
P/J22
s3040-088
4-99