Rear Cover - Xerox Phaser 3010 Service Manual

Service Parts Disassembly

Rear Cover

PL1.1.12
4-56
1. Open the Rear Door.
2. Remove the Main Tray (page 4-58).
3. Remove the Front Cover (page 4-60).
4. Remove the Right Cover (page 4-57).
5. Remove the Left Cover (page 4-64)
6. Remove the Scanner (page 4-109).
7. Remove the Front USB Board (page 4-65).
8. Remove the WiFi bracket if present (page 4-66).
9. Remove the Top Cover (page 4-52).
10. Lift the Fuser levers.
11. Remove the 4 screws (silver, tap, 8 mm) that secure the Rear Cover.
12. Release several hooks that secure the cover.
Xerox Internal Use Only Phaser 3010/3040/WorkCentre 3045 Service
s3040-062