Service Maintenance Procedure; Recommended Tools; Cleaning - Xerox Phaser 3010 Service Manual

Maintenance

Service Maintenance Procedure

Recommended Tools

Cleaning

6-2
Perform the following procedures whenever you check, service, or repair a printer.
Cleaning the printer, as outlined in the following steps, assures proper operation of
the printer and reduces the probability of having to service the printer in the
future.
The frequency of use, the type of media printed on, and operating environment
are factors in determining how critical cleaning the machine is and how often it is
necessary.
• Toner vacuum cleaner
• Clean water
• Clean, dry, lint-free cloth
Perform the following general cleaning steps as indicated by the printer's
operating environment.
Caution
Never apply alcohol or other chemicals to any parts of the printer. Never use a
damp cloth to clean up toner. If you remove the Imaging Unit, place it in a
light-protective bag or otherwise protect it as exposure to light can quickly
degrade performance and result in early failure.
1. Record number of sheets printed.
2. Print several sheets of paper to check for problems or defects.
3. Turn the printer power Off and disconnect the power cord.
4. Remove the Toner Cartridge, Left and Right Covers, and Rear Cover before
cleaning.
5. Ensure that all cover vents are clean and free of obstructions.
6. Remove any debris or foreign objects from inside of the printer.
7. Clean the trays, media guides and extensions.
8. Clean all rubber rollers with a lint-free cloth slightly dampened with cold water.
Xerox Internal Use Only Phaser 3010/3040/WorkCentre 3045 Service