Error Troubleshooting
Registration Sensor
1. Enter Service Diagnostics (page 2-24).
2. Open the Rear Door.
3. Use the Up and Down Arrow buttons to select Printer > IOT Diag > DI-5.
4. Operate the actuator to check sensor function.
5. Confirm the number shown on the display increases every time the actuator is
operated.
6. Press the Stop button to stop the test.
Actuator
Registration Sensor
s3040-158
Phaser 3010/3040/WorkCentre 3045 Service
Xerox Internal Use Only
2-43