Maintenance
Adjusting Altitude
6-6
Print quality varies with barometric pressure. Since the barometric pressure
decreases as the altitude increases, altitude can affect the print quality. To
optimize print quality for your location, select an altitude setting to match the
your location.
To adjust altitude:
1. On your computer, click Start > All Programs > Xerox Office Printing > Phaser
3010/3040 > Printer Setting Utility.
2. Click the Printer Maintenance tab, then select Adjust Altitude from the list.
3. Click the arrow for the drop-down list to the right of Adjust Altitude.
4. Select the value closest to the altitude of your location.
5. Click Apply New Settings to change the setting.
6. Close the Printer Setting Utility.
Xerox Internal Use Only
Phaser 3010/3040/WorkCentre 3045 Service