Xerox Phaser 3010 Service Manual page 201

Phaser 3010/3040/WorkCentre 3045 Service
Troubleshooting Procedure Table (continued)
Step Actions and Questions
3 Inspect the Registration Roller and
the Registration Pinch Roller for wear
or damage.
Is either part worn or damaged?
4 Does the image print correctly?
5 Replace the Feed Roller (page 4-17).
Does the image print correctly?
6 Replace the Separator Pad
(page 4-74).
Does the image print correctly?
7 Replace the MCU Board (page 4-43).
Does the image print correctly?
Xerox Internal Use Only
Image Quality
Yes No
Replace the Go to Step 4.
Registration
Roller
(page 4-27),
then go to
Step 6.
Complete. Go to Step 5.
Complete. Go to Step 6.
Complete. Go to Step 7.
Complete. Contact field
support for
assistance.
3-27