Lph Failure - Xerox Phaser 3010 Service Manual

LPH Failure

Phaser 3010/3040/WorkCentre 3045 Service
The LED printhead in the xerographics assembly has failed.
Applicable Error
• 061-370: LPH Failure
Initial Actions
• Cycle printer power.
• If the problem persists, use the following procedure.
Troubleshooting Reference Table
Applicable Parts
Cable FFC, PL3.2.9
■
IP Board, PL7.2.8 (3010/3040)
■
IP Board, PL7.3.3 (3045)
■
Harness Assy MC LP, PL7.1.10
■
MCU Board, PL7.1.3
■
Troubleshooting Procedure Table
Step Actions and Questions
1 Check connections between the IP
Board and xerographics assembly.
Are the connectors secure?
2 Replace the IP Board (page 4-45).
Does the error persist?
3 Replace the MCU Board (page 4-43).
Does the error persist?
Xerox Internal Use Only
Error Troubleshooting
Wiring and Plug/Jack Map References
"Map 1" on page 7-3
■
"Xerographics" on page 7-15
■
Yes
Go to Step 2.
Go to Step 4.
Contact your
designated
field support for
assistance.
No
Secure the
connectors.
Complete.
Complete.
2-93