TestPatASIC[IOT] Test Print
TestPatLPH[IOT] Test Print
Phaser 3010/3040/WorkCentre 3045 Service
Prints theprint engine test pattern.
If the pattern does not print correctly, check the
MCU Board. If the pattern prints OK, check the
Image Processor Board.
Prints the IP Board grid pattern.
Compare the print with the sample. If the test print
does not match the test print shown here, check the
MCU Board. If the test print is OK, check that the
printer is connected correctly.
Xerox Internal Use Only
Image Quality
s3040-176
s3040-177
3-33