Phaser 3010/3040/WorkCentre 3045 Service
Feed Solenoid
The Feed Roller rotates when the Main Motor (FULL) and the Feed Solenoid tests
are executed simultaneously.
1. Enter CE Diagnostics (page A-2).
2. Remove the Bypass Tray.
3. Run the Main Motor Full and Feed Solenoid tests.
4. Check that the Feed Roller rotates.
5. Press the Cancel button to stop the Feed Solenoid test.
6. Press Cancel to stop the motor test.
7. Replace the Bypass Tray.
Xerox Internal Use Only
Error Troubleshooting
Feed Roller
s3040-170
2-39