Image Quality
Toner Smears
Initial Actions
3-12
There are faded or completely non-printed lines along the page in the direction of
the paper travel from the leading edge to the trailing edge.
Warning
Allow the Fuser to cool before servicing the printer.
•
Check that the media settings match the media in use.
•
Check that the media is dry and in good condition.
Troubleshooting Reference Table
Applicable Parts
Transfer Roller, PL1.1.11
■
Fuser, PL5.1.1
■
Troubleshooting Procedure Table
Step
Actions and Questions
1
Reseat P/J18 on the MCU Board,
and P/J201 on the LVPS.
Does the image print correctly?
2
Replace the Fuser (page 4-38).
Does the image print correctly?
Xerox Internal Use Only
Example Print
Smudges or Smears
Yes
Complete.
Complete.
Phaser 3010/3040/WorkCentre 3045 Service
No
Go to Step 2.
Replace the
Transfer Roller.