Phaser 3010/3040/WorkCentre 3045 Service
Troubleshooting Procedure Table (continued)
Step
Actions and Questions
3
Inspect the Registration Roller and
the Registration Pinch Roller for wear
or damage.
Is either part worn or damaged?
4
Replace the Separator Pad
(page 4-23).
Does the image print correctly?
5
Replace the MCU Board (page 4-43).
Does the image print correctly?
Xerox Internal Use Only
Image Quality
Yes
No
Replace the
Go to Step 4.
Registration
Roller
(page 4-27) or
Registration
Pinch Roller
(page 4-26).
Complete.
Go to Step 5.
Complete.
Contact your
designated
field support for
assistance.
3-25