Xerox Phaser 3010 Service Manual page 279

Service Parts Disassembly
26. Remove 4 screws (silver, tap, 8 mm), that secure the lower plate to the chassis.
s3040-029
27. Remove the Feed Gear and Spring (page 4-76).
28. Release the left Feed Roller Cam latch and slide the cam towards the center of
the shaft., and move the Feed Shaft to the left side of the printer.
29. Move the Feed Roll Assembly left to release the shaft from the chassis.
Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 4-69