Main Drive Motor - Xerox Phaser 3010 Service Manual

Main Drive Motor

PL6.1.2
Phaser 3010/3040/WorkCentre 3045 Service
Caution
The gears of the Main Drive Assembly are not captive to the cover. Use care
when removing the cover to maintain correct gear orientation.
1. Remove the Main Tray (page 4-58).
2. Remove the Front Cover (page 4-60).
3. Remove the Inner Front Cover (page 4-62).
4. Remove the Left Cover (page 4-64).
5. Remove the Right Cover (page 4-57).
6. Remove the Scanner (page 4-109).
7. Disconnect P/J7601 from the Front USB Board.
8. Disconnect P/J6501 from the WiFi Adaptor.
9. Remove the Top Cover (page 4-52).
10. Remove the Rear Cover (page 4-56).
11. Remove the IP Board (page 4-103).
12. Remove the Fax Board if present (page 4-105).
13. Remove the IP Board Bracket (page 4-106).
14. Remove the Main Drive Assembly (page 4-95).
15. Disconnect P/J10 and P/J23 from the MCU Board
16. Remove the 2 screws (silver, metal, 6 mm), and 3 screws (silver, tap, 8mm) that
secure the Main Drive Motor to the chassis.
Xerox Internal Use Only
Service Parts Disassembly
P/J13
P/J10
P/J23
s3040-044
4-97