Top Cover - Xerox Phaser 3010 Service Manual

Top Cover

PL1.1.4
Phaser 3010/3040/WorkCentre 3045 Service
1. Open the Rear Door.
2. Remove the Main Tray (page 4-13).
3. Remove the Front Cover (page 4-15).
4. Remove the Right Cover (page 4-12).
5. Remove the Left Cover (page 4-16)
6. Remove the Output Tray Extension (page 4-6).
7. Release the front tabs, and carefully lift the Top Cover from the right and
disconnect P/J220 on the Control Panel to remove the Top Cover.
Xerox Internal Use Only
Service Parts Disassembly
s3040-023
4-7