Lvps Bracket - Xerox Phaser 3010 Service Manual

LVPS Bracket

PL7.2.4
Phaser 3010/3040/WorkCentre 3045 Service
Caution
The LVPS bracket uses a small spring to ground the bracket to the chassis.
1. Remove the Main Tray (page 4-58).
2. Remove the Front Cover (page 4-60).
3. Remove the Inner Front Cover (page 4-62).
4. Remove the Left Cover (page 4-64).
5. Remove the Right Cover (page 4-57).
6. Remove the Scanner (page 4-109).
7. Disconnect P/J7601 from the Front USB Board.
8. Disconnect P/J6501 from the WiFi Adaptor.
9. Remove the Top Cover (page 4-52).
10. Remove the Rear Cover (page 4-56).
11. Remove the Power Switch Assembly (page 4-101)
12. Remove the LVPS (page 4-102).
13. Release 2 hooks that secure the front harness guide and remove the guide and
LVPS insulator.
Xerox Internal Use Only
Service Parts Disassembly
s3040-094
4-107