System Restart - Xerox Phaser 3010 Service Manual

Error Troubleshooting

System Restart

Applicable Errors
Initial Actions
2-114
An internal IP Board error occurred.
117-331: System Restart
117-332: System Restart
117-333: System Restart
117-334: System Restart
117-340: System Restart
117-342: System Restart
117-343: System Restart
• Cycle printer power.
• If the problem persists, use the following procedure.
Troubleshooting Reference Table
Applicable Parts
IP Board, PL7.2.8 (3010/3040)
■
IP Board, PL7.3.3 (3045)
■
Troubleshooting Procedure Table
Step Actions and Questions
1 Check the connectors on the IP
Board.
Are the connections secure?
2 Does the error persist?
3
Replace the IP Board (page 4-45).
Does the error persist?
Xerox Internal Use Only
117-344: System Restart
117-346: System Restart
117-348: System Restart
117-349: System Restart
117-350: System Restart
117-351: System Restart
117-366: System Restart
Wiring and Plug/Jack Map References
"IP Board" on page 7-19
■
Yes
Go to Step 2.
Go to Step 3.
Complete.
Phaser 3010/3040/WorkCentre 3045 Service
No
Securely
reconnect the
connectors,
then go to
Step 2.
Complete.